Saturday, 1 September 2012

Needle Felted Bag

Another little project made for Carlisle's new Hobbycraft store.

The brief was very basic - decorate this bag.


What to do?  I took a look in my vast craft cupboards and found some felting wool,  Hobbycraft sells a similar wool, and the tools to do this project, so that was perfect.

Tools needed then are something to felt onto, a foam board underneath to stab into (I use a garden kneeling pad, I find they work well and only cost £1.00 from Morrisons)  A felting needle (you can also buy a tool to hold a few needles, which would have been easier for this project). and felting wool.


I started by drawing a heart - badly, but never mind, it would be soon covered with wool.


You take a piece of wool, stretch it out a little, then simple STAB, STAB, STAB into the bag (with the foam pad inside so it doesn't go right through).


I carried on until the heart was done, then I added another row (just coz I could)




Once done it looked a little bare in the centre, so I took some scraps of wool, rolled them into a ball and stabbed it into the middle of the heart.


Sunday, 26 August 2012

"Smartie" Shoes

Today is my daughter, Shona's, 19th birthday.

She decided she would like a pair of Dr Martens for a gift, but she wanted ones with "Smarties" on like what she has when she was little.

She was about this age....


.... when I bought her some Smartie covered DM's, she loved them SO much that she refused to take them off, even for bed.  Many a night I had to sneak back into the room once she was asleep and remove the boots from her feet.  They looked like this...


Well, of course, 16 or so years later and Smartie DM's are nowhere to be found, and definitely not in adult sizes.  A compromise needed to be made.

When she was out at work, myself and hubby Andrew, took it upon ourselves to make her a pair of Smartie shoes.

We found an old pair of her canvas shoes, and a pack of felt tips and set to work.


A penny turned out to be the right size for the design.


It took a little while to fill up the whole shoe.


Then it was time to colour them in.  The old felt tips we had found in the back of a cupboard were not too fresh, and needed some real strong scribbling to get some colour onto the canvas.



Of course, we needed to leave a little gap to show the 'shine' on the Smartie.


Then they were done...

Andrew's shoe is on the top, mine is on the bottom.  As you can see he is the novice crafter and drifted out of the lines sometimes  ;)   We both signed our names on the underside of the tongue.

When it came to opening her presents, her expression was that of confusion.  She couldn't understand why we had bought her a pair of .... and I quote...."Someone else's tatty second-hand shoes".

The penny finally dropped that they were HER tatty shoes, freshly decorated  :)

She thought they were fabulous.



Then of course I pulled out her 'real' pressie - a pair of Docs, in her favourite colour.

Smiles all round :)

Sunday, 19 August 2012

Rosie - The Deco-Patch Bear.

Not quite my first attempt at Deco-Patch, as I have done a couple of bedside table lamps - but they are still a work in progress and a blog will follow about them once completed.

So, this is a cardboard formed bear, ready for Deco-Patching.


Deco-Patch is literally tearing up patches of patterned tissue paper (other papers will also work) and sticking them onto your item with PVA (or special deco-patch) glue.



I had to work in stages to allow the bear to dry, as I was getting glue all over the place.


But, don't you just love covering your hands in PVA, leaving it to dry, then pealing it all off?  It can't be just me, surely?

When she was complete she had to sit in a most peculiar manner to dry completely.


I then decided that she didn't quite look 'finished' enough, that although she was very colourful and pretty, she needed a few more additions.

I added a Swarovski Cabochon for her eyes - how they sparkle.


Felt pads for her feet.


And a couple of flowers for her hair  :)


I found some matching coloured plastic gems to stick on her paws as they looked a bit 'bare' (geddit?).


Then tied two ribbons around her neck.

Now all she needed was a name ....... ROSIE!


Tuesday, 24 July 2012

Hobbycraft.

I have some news to share with you.  I have a new job!

Yep, you read correctly, I have a new job.  At Hobbycraft.  What could be more perfect for a crafter?

I wasn't even aware that I was looking for a job, I know that sounds a bit daft, but driving past an empty store in Carlisle, I noticed that there was a Hobbycraft sign outside.  I could hardly contain my excitement on the way home....Carlisle, getting a Hobbycraft!  Whoop.

Whenever we go anywhere in the UK, I find myself Googling, finding and visiting the nearest HC,  there is always something 'new' to try in there. Last time I bought resin, still not used it but plan to...

Anyway, I digress. So I went on the HC website to see when the shop was to open, and found the 'jobs' link.  Light bulb moment, I could happily work there, I thought, so I filled in the online application, ended up being invited for an interview and, much to my delight, was offered a job.

I will be just working a couple of 4 hour shifts a week, which is perfect for me with all the other stuff I do.  The Bead Shed has been quite quiet since the Royal Mail price increases, so it will be a nice change to be out, mixing with other people, and getting paid for the pleasure  :)

If you are local to Carlisle, check out the Hobbycraft website, they are offering a free gift to the first 100 people through the door on Saturday 8th Sept.  You might be a lucky one.

If you see me there, come up and say ' Hi'  :)

Wednesday, 18 July 2012

Implosion Beads

One of the skills I learnt on the Marble Class was how to do implosions.  Now I have touched on these once before .... way way back in February 2009 when I had a class with Laura Sparling.  I didn't practise the skill once home as I was concentrating on encasing, which is what I really wanted to learn to do way back then.

In the marble class we did an implosion within a marble design. My interest in them was reignited, so once home I sat down at the torch to play...

Implosion beads are not for the impatient. You have to, very slowly, allow the glass to drop which drags the 'petals' down. There is a lot of practising required to get them anywhere near decent, never mind perfect.

First I tried some regular sized beads, but I was unhappy with how the glass didn't have enough room to make the pattern drag properly.


I felt the beads needed to be bigger to get a good effect, so I made some teardrop shaped ones.  I was quite pleased with these - a long way to go, but a good start.




This one was a double imlposion, I did a teardrop first, then added more glass and imploded it the opposite way, then shaped it into a barrel.


Now, if you want to see some perfect (and I mean PERFECT) implosions within marbles, check out this page.
http://www.kobukiglass.com/mableinfo.html

Monday, 9 July 2012

A free knitted scarf pattern.

I often sign up for newsletters on craft sites.  I don't always read all the newsletters, but last weekend the word "FREE" caught my eye..... as it does  :)

It was a free knitting pattern for a scarf.  Nothing unusual there really, a scarf is one of those things that most people will knit at some point (presuming they knit of course).  But this one just had something about it that I liked.

I go walking in the Lakes and Fells quite a bit, and a scarf is a bulky thing to have, although warm and useful they can be a bit cumbersome.  If it's too long it gets caught up in everything, if it is too short then it keep falling off.  What I liked about this pattern, that it was a short scarf with a way of keeping it in place - genius!  Why didn't I think of this?


So, as I was going away that weekend, I grabbed some needles and a couple of balls of wool out of the huge stash I have and took it with me.  Alas, I had only done 4" of work when I realised I would need some stitch holders (which were 4 hours away at home).  It was the weekend we had gone to Bridlington for the Tuffnell Glass Marble Class. My parents had blagged a lift with us so they could have the weekend by the sea-side, so on the saturday I sent my mother out on a mission to find me some stitch holders.  Within an hour she had them, from a charity shop at the princely price of 20p each  :)


There was a small error in the pattern I noticed (just stitch counts) but I just ignored it and it worked fine.


(Had a little doodle on this photo to show you how it works)


It is so cosy warm, and sits beautifully on the neck.

I have checked the newsletter and I can 'forward to a friend', so if you would like a copy give me a yell and I will send it onto you.


Friday, 6 July 2012

Making Marbles at Tuffnell Glass.

Last weekend, the Hubster and myself had booked ourselves on a Marble making course at Tuffnell Glass.

So, on the friday evening, after work, we set off from home and drove for 3.5 hours to Bridlington, where we had booked a little seaside B&B.

Saturday, we arrived at Tuffnell House headquarters where the marble class was being held.

Our tutor was Jan Rigden-Clay, lovely lady and very very talented. 




I had previously met Jan, having been on a course with her at the Flame Off, with Pati Walton.   
Here are some of Jan's own marbles.






So, saturday, we learnt to make marbles, or rather I did.  Andrew can already make a decent marble, but he wanted to learn some different techniques.  I had only made a couple of really bad ones before in soft glass, the glass we were using on this course was Boro.  It works a little differently and I struggled a bit to start with.


I was getting so cross with myself for producing such badly shaped marbles.

The first one was just a two colour marble, to learn how to form the nice round shape.


Second, we did a vortex marble, with frit.  It is like looking into a deep pool.


The final one of the first day was a "wig-wag" marble.



Sunday was a bit better, I must have had my marble head on as I seemed to be getting the hang of it.

The first one of this day was a "Fireworks" marble, with a deep depth of dichroic glass inside.


This is the back of the same marble.


Another frit vortex marble.


And an implosion marble, I enjoyed making this one and seeing how it turned out.


Definately something I plan to continue, I really enjoyed making them.  Even though each marble can take 1 - 1.5 hours to make!


Tuesday, 26 June 2012

Gill Curwen at Rag Rug Club.

A couple of years ago I decided I would like to try rag-rug making, so I managed to track down a local group that met up once a fortnight.  This group is part of the U3A, (University of the 3rd Age), and is run by a lovely rug maker called Judith Harrison.

I have made 3 or 4 rugs to date now, you can find them on my Opus Moon Facebook page.  I always use the proddy method, having never ventured into any of the other techniques.

About a year ago I was teaching at Higham Hall, and I got talking to another tutor who was also there that weekend.  It was Gill Curwen from Bapple & JoJo.  Gill makes rugs for a living and had a degree in rug making.  We kept in touch via Facebook and I asked her if she would come to our class to give a little talk and show off her work.

She very kindly agreed, and today was that day.

Walking into the room I was met by the most colourful array of gorgeous rugs.  I took a few photos, but I only had my phone with me so they are not the best quality pics.





I am jam packed full of new ideas and inspiration now, can't wait to start and put some of those ideas into action.

You can find more of Gill's work on her Facebook Page.